MsTech iDPL-D (Dual) Dual In-Line Router

Features

• 

  Dual Station

  For dual lane product line.
  It is able to be implemented double performance and produce mix products with two working station as front & back.

• 

  Automatic Width Adjustment for Multi-Spindles

  It is able to be installed 2~4 spindles, and be accurate and convenient operating by automatic width adjustment.

• 

  Magneto Vacuum Type Loader/Unloader

  It is able to be model change quickly & easily by applied magneto vacuum type loader & unloader port.

• 

  Camera Teaching

  It is available teaching accurately & easily to use camera

• 

  Compact Design

  It is the most compact design for securing customer space

• 

  Bit Broken & Slip Down Detection

  Bit detection sensor is standard installation for sounded alarm when bit broken & slip down.

• 

  Ionizer

  It is standard installation for protected PCB and efficient removing dust(area ionizing type)

• 

  Aligner (InLet Conveyor)

  Aligner + Inlet conveyor is integrated system, and able to receive the PCB with any position by variable aligner in depending on position of conveyor of front equipment.

• 

  Total 16 Axis Servo System

  It is able to do auto controlling for all inside process by 8 axis on each stations.

• 

  Loader Rotating

  Loader is rotated 90 or 180 degree by model for fixing PCB on the jig or cutting area.

• 

  Multi-Bit Function & Life Time Management

  It is using multi-bit by 2~3 level for reducing consumable cost of customer and sounding alarm when bit is on each level by life time management.

• 

  Spindle Mate

  Inner EOCR is standard installation for protecting PCB damage as from cutting overload condition by detecting current of spindle motor with real time.

• 

  UPS

  It is as installed as standard, and protecting data and equipment from line shout down.
  (IPC covering capacity)

Options

• 

  Barcode Interlock & MES

  It is used vision system or scanner to read the 1D/2D barcode for MES function with costumer’s network

• 

  Pass/Fail PCB Separation

  It is separating and releasing the fail PCB by NG conveyor, after getting data of NG PCB from front equipment by MES.

• 

  Vision System

  It is able to detect different model and loading fail, and available fiducial checking.

• 

  Edge Detection Function

  As powerful vision system function, the both sides PCB edges beside a cutting tab are detected and compensate cutting position by tolerance of boards.

• 

  ID Verification with Fingerprint

  It is available to be high security user management and easy logging by registered and appreciated user fingerprint.

• 

  Dimensional Inspection

  It is inspecting cutting measure & burr after cutting, and able to implement additional cutting.

• 

  Real-Time Spindle RPM Monitoring

  It is protected PCB with sounding alarm when spindle PRM is declining by detecting it in real time.

• 

  Auto Width Adjustment for Multi-Spindle(AWA)

  It is able to install 3~5 spindles in depending PCB array. Each spindle is able to do auto width adjustment(AWA)
  (Patent)

• 

  Auto Tray Function

  It is loaded PCB after cutting it to tray or slot box by automatically, also auto changing and stacking tray or slot box when PCB is full in there.

• 

  Pallet Transporting System

  After cutting PCB, it is released seated on the pallet from costumer.

• 

  Shuttle Jig Outlet

  It is releasing PCB by seated on the shuttle jig for automation of next equipment.

• 

  Gripper Unloader

  If there is restriction of unloading with heavy PCB or high component, it is able to use gripper type of unloader.

• 

  500W Spindle

  It is implemented more powerful performance by high capacity spindle(500W)

• 

  Auto Tool Changing System(ATC)

  When life of bit is almost done or it is broken, it is changed the bit automatically. (Available with 4033 and 4041 spindle only)

• 

  Auto Conveyer Width Adjustment

  It is saved model changing time by using motor to save the parameters of width pitch.

• 

  Visual Data Log System (Visual Recorder)

  It is able to check phenomenon & cause by video recoding & saving inside of equipment when issue is happened during it is working.

• 

  Real-Time Self-Diagnosis Dust Collector

  It is able to do self-diagnosis about pressure, damage & pollution level inside dust collector and sound alarm to router(patent-pending)

• 

  Filter+Cyclone Complex Dust Collector

  It is able to use filter semi-permanently with applied cyclone, and install plastic bag.

• 

  Easy Handling Dust Collector

  It is able to use the plastic bag for disposing dust cleanly & easily.